home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload Trio 2 / Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO / dir24 / aprs308.zip / README.WWN < prev    next >
Text File  |  1994-01-03  |  11KB  |  167 lines

  1. README.WWN      SUGGESTED USE OF APRS IN THE WATERWAY NET
  2.  
  3. APRS is the perfect tool for passing informal traffic to an from boats and for
  4. tracking boats underway.  APRS incorporates most of the features that the US
  5. Navy has used for years in their tactical data networks linking all ships
  6. underway.  APRS was designed to operate continuously in the background and
  7. provide connectivity between widely dispersed stations.  It will provide
  8. position and status reporting for all units underway, in near real-time.  I
  9. say near-real-time, because APRS should not be considered a mechanism for
  10. intense keyboard to keyboard conversations; but is ideal for exchanging one-
  11. liners over an extended time frame without having to contend with the problems
  12. of maintaining a CONNECTION.  My experience in using APRS on the Naval Academy
  13. boats on summer cruise, is that with boats transmitting their positions
  14. and status once every 15 minutes, there is over a 90% chance that every boat
  15. will be seen at least once every 4 hours.
  16.  
  17. PROPOGATION STATISTICS:  A secondary benefit of the redundant beacons is that
  18. it operates like a poor-man's chirp-sounder.  Since APRS keeps statistics on
  19. the number of packets heard from each station over the last 24 hours, this
  20. display can be used to verify HF connectivity between stations throughout the
  21. day.  It's like a free-bee radio check every 15 minutes everywhere!  After
  22. watching APRS statistics for just a day, or so, the daily variations in
  23. propogation conditions to all stations is visible at a glance.  Further
  24. improvements in connectivity is possible by changing frequency bands during
  25. the solar day.  By saving statistics on each band in a different file, the APRS
  26. user can use this data to optimize his connectivity at any time of day or
  27. location.
  28.  
  29. WATERWAY NET OPERATION:  There is already a national APRS position reporting
  30. network operating on 7.085 and 10.151 LSB.  (Tune 510 Hz higher if you are
  31. operating an AEA PK-232)  All boaters and Recreational Vehicles are welcome!
  32. To see the locations of all stations on the net, tune your TNC to the exact
  33. frequency and monitor for at least 15 minutes.  When you first activate APRS,
  34. it will send out a query to all stations on the network for their positions.
  35. If you are not properly tuned in when this query goes out, most stations might
  36. miss it.  For this reason, APRS has the QUERY command so that you can manually
  37. initiate this ALL-NET APRS Query.  After receipt of a Query, all stations
  38. will set a 4 minute random timer, and will respond sometime in the next four
  39. minutes.  So be patient..  Even without a Query, all stations will transmit
  40. their positions once every 15 minutes...
  41.  
  42. POSITION REPORTING:  Their are several ways to report  your position into the
  43. APRS network.  First, run APRS and both your position and status will be
  44. reported automatically.  Additionally, your station can send and receive
  45. messages to and from other stations on the net.  If you turn off your PC
  46. computer, APRS places your position report in your TNC BeaconText so that
  47. your TNC will continue to report your last known position once every 15
  48. minutes or so.  This Beacon only contains your Position and words to indicate
  49. that your APRS program is not running.  If you want your TNC to automatically
  50. report your position AND some meaningful status information, you can enter
  51. your LAT/LONG and additional comments manually into your TNC BText before
  52. Quitting APRS.
  53.  
  54. GPS/LORAN AUTOMATIC REPORTING:  With the optional APRS $9 interface routines,
  55. APRS can report your real-time position automatically.  Simply connnect your
  56. navigation device NMEA-0183 output to your second PC COMM port.  APRS will
  57. insert the NMEA position, course and speed automatically into your APRS
  58. position report.
  59.  
  60. OBJECT REPORTING:  Since ANY APRS station can report the position of any other
  61. objects, your position can be automatically transmitted into the APRS network
  62. by ANY other station.  Simply make a manual report to a friend or other
  63. waterway net member running APRS.  He can put you on his map so everyone in
  64. the net will see you.  Give your LAT/LONG, course and speed.  You can also
  65. include about 28 characters (36 without Cse/Spd) of additional comments as
  66. desired.   This is a good place to report your Estimated-Time-of-Arrival, etc.
  67. All APRS position reports are time stamped, so that there is no confusion as to
  68. when a report was valid.
  69.  
  70. DEAD RECKONING:  APRS automatically dead reckons all position reports.  This
  71. causes all stations to see the most realistic positional display.  All
  72. stations that are dead reckoned show up in light blue color and have an
  73. anchor line back to their last actual reported position.  To defeat dead
  74. reckoning and display all stations at their last reported positions, simply
  75. hit Ctrl-D to toggle off dead reckoning.  When moving the cursor to select
  76. stations on the map display be sure to select the actual position, not the
  77. dead reckoned position.
  78.  
  79. TRACK HISTORIES:  APRS automatically saves all track histories to disk.  To
  80. reduce redundant data, APRS normally filters out all positions from the same
  81. station that are within 80 yards of each other.  This accounts for the random-
  82. ness of the Selective Availability.  This filter can be turned off, so that
  83. all positions (that are not exact duplicates) will be saved.  Fixed stations
  84. will only be saved once per track history file.  These track histories can be
  85. replayed at any time, either from memory or from file.
  86.  
  87. WEATHER REPORTING:  All stations on the net can be apprised of unusual weather
  88. conditions by any station placing a weather symbol on the map.  Just like
  89. stations, weather symbols will be dead reckoned between reports.  In this
  90. way APRS is ideal for reporting the movements of hurricanes and tropical
  91. storms.  There are over a dozen different weather symbols for this type of
  92. weather reporting.  Secondly, APRS has a $9 optional interface routine for
  93. automatically reporting the wind speed, direction, temperature and rainfall
  94. from the ULTIMETER-II home weather station.  All stations with this interface
  95. show up on the maps as a large blue DOT with a line indicating the wind
  96. direction and speed.  Their position report also includes the temperature and
  97. the rainfall.  Similarly, any station can select to use the Weather station
  98. symbol for his station, and can manually enter his wind speed and direction
  99. for display on the net.
  100.  
  101. WATERWAY NET OPERATIONS:  It is recommended that all Waterway Net participants
  102. that are HF packet capable begin reporting thier positions on the HF APRS nets.
  103. No changes to the existing voice net on 7068 are required!  Since APRS will
  104. be operating continuously, 24 hours a day, it will provide a reliable and
  105. continuous background reporting of most stations.  This will free up the
  106. voice net for passing of more voice traffic, and for position reports from
  107. non packet stations.  One APRS station should volunteer daily to uplink the
  108. voice position reports into the network from his display by placing them on
  109. his screen as OBJECTS.  Once these reports are being uplinked into the APRS
  110. net, any other APRS station can assume reporting responsibility for that
  111. OBJECT (station) simply by uplinking a later report.  If the original station
  112. uplinking an OBJECT hears a later report, it will update its screen with the
  113. new report and will no longer report on that OBJECT since another station has
  114. taken reporting responsibility for that OBJECT.  This enables stations to
  115. pass off APRS reporting responsibilities and keeps the network from being
  116. dependent on specific full time stations.
  117.  
  118. WATERWAY NET MESSAGE TRAFFIC:  All APRS stations are able to post a one-line
  119. braodcast message (BEACON) to all stations on the net.  This can be used to
  120. alert all stations or make general announcements.  Secondly, all APRS stations
  121. can send short message lines to any other APRS station on the APRS net.  These
  122. messages lines are ACKed line by line for assured delivery.  These short
  123. messages can be used throughout the day for making schedules for voice
  124. contacts on 7268 without the stations having to listen to the HF frequency all
  125. day.  Since APRS does not use a CONNECTED packet protocol, these short message
  126. lines can be used all day long without the problems of timing out.  After HF
  127. voice operations, stations that are packet equipped can just turn the volume
  128. down and park the HF rig on the APRS frequency instead of turning it off.
  129. This will keep them fully informed and reported without any additional effort.
  130.  
  131. APRS NET FREQUENCIES:  Since most boaters are using a back-stay or other
  132. non-resonant antenna with an antenna tuner, they have no problems operating the
  133. non-traditional WARC bands.  For this reason, and to avoid all the QRM on
  134. 40 meters, I recommend that 10.151 LSB be the primary frequency for the
  135. WaterWay Net position reports.  YES, THIS IS IN THE BAND!  Operating LSB
  136. with 1700 HZ tones makes your radiated enegy centered at 10151 - 1.7 KHz
  137. or 700 Hz inside the band edge.  The radiated energy of an HF packet signal is
  138. down by the required 40dB at the band edge.  Because most HF packeteers have
  139. not done this math, you will find the frequency clean with no other packet
  140. QRM.  If you still are not convinced, just tune to 10.147.6 and operate
  141. USB.  It is the same frequency!  We always speak of 10.151 LSB, however,
  142. since the convention on packet is to always refer to the LSB convention.
  143. (AEA TNC's will tune 510 Hz higher and lower respectively since they use
  144. tones centered at 2210 Hz). 
  145.  
  146. OTHER BANDS:  An APRS reporting frequency should also be established on each
  147. of the higher bands as well.  I have not done this, because both of my HF rigs
  148. are dedicated full time to 7085 and 10151.  I would encourage distant travelers
  149. to stake out additional APRS frequencies on 18 and 24 meters.  I have been
  150. avoiding the QRM on 20 meters, but after seeing all of the fixed station APRS
  151. activity on 10.151 over the Xmas holidays, I now think it would be a good idea
  152. to start an APRS frequency on 20 meters too for just casual playing around with
  153. APRS.   New users could plop there and experiemnt with all the features of APRS
  154. without clogging up the RV and Boaters net on 10.151!
  155.  
  156. NAVAL ACADEMY APRS NET:  During summers only, the Academy operates an APRS net
  157. on 3 Navy HF frequencies for tracking its 20+ boats on summer cruises.
  158. Serious HF APRS shoreside stations might be useful for assisting the
  159. Academy in passing traffic.  If you are interested, please contact WB4APR.
  160. APRS is also used by the Afloat MARS net for reporting the positions of
  161. all stateside MARS stations on frequency for passing phone patch traffic.
  162. The ships, of course, do not report their positions for security reasons, but
  163. using APRS to show the ships who is listening stateside has proved to be
  164. an excellent APRS application.  For more information on the Navy MARS APRS
  165. afloat net, contact N1BFQ in New Hampshire.
  166.  
  167.